Restore the Surface. Preserve the Shine.
At CMC Bathtub Refinishing, we restore the beauty and function of your existing tub, saving you time, money, and the mess of a full replacement. Areas we serve are Bethany Beach, Sussex and Lewes, DE and Ocean City, and Salisbury, MD
Your Trusted Bathtub and Shower Restoration Services in Dagsboro, DE
Welcome to CMC Bathtub Refinishing, your local expert in bathtub and shower restoration services in Dagsboro, DE and throughout Sussex County. We don’t refinish, reglaze, or resurface—we restore. Our mission is simple: to preserve the original beauty of your bathroom fixtures using a safe, non-invasive, and environmentally friendly process.
Unlike traditional refinishing companies that rely on chemical sprays and topcoats that peel, we use a detailed multi-step cleaning process to remove stains, scum, and discoloration—bringing back the original shine of your surfaces. There's no odor, no mess, and no coatings—just a visibly cleaner, healthier, and longer-lasting result.
Whether you're dealing with years of soap scum, hard water buildup, or rust stains in your tub or sink, CMC offers a better solution. We're proud to deliver results that last without introducing harmful fumes or chemicals into your home.
Our Services
We focus exclusively on restoring what’s already there—not masking it with chemicals or coatings. Here’s what we offer:
Bathtub Restoration
Our flagship service revives dull, stained bathtubs without using paint, sprays, or sealants. We remove hard water deposits, iron stains, and layers of soap scum through a careful surface renewal process that improves both appearance and durability.
Shower Restoration
We deep-clean fiberglass and porcelain shower bases to eliminate soap scum, discoloration, and mineral buildup—restoring the clarity and shine of your shower surface without applying anything artificial.
Stain and Soap Scum Removal
Hard-to-clean stains don’t stand a chance. Our multi-step cleaning method targets iron, rust, and soap
scum, restoring the look and hygiene of your tub or shower while preserving the original finish underneath.
Bathroom and Kitchen Sink Restoration
We extend our restoration services to porcelain and cast iron kitchen sinks, removing kitchen stains like rust, grease, and food discoloration. Our method restores the shine without damaging the surface or applying any coatings.
Why Choose Restoration Over Refinishing?
Most companies that offer bathtub "refinishing" rely on spray-on epoxy or paint that peels after a few years. These methods often require sanding, etching, and the use of toxic paint strippers—like methylene chloride—that pose serious health and environmental risks.
At CMC Bathtub Refinishing, we take a different approach:
- No peeling: Because we don’t add anything artificial, there’s nothing to fail or flake off.
- No strong odors: Our work is entirely fume-free—safe for your home, family, and pets.
- No mess or disruption: We don’t sand or coat, so there’s no overspray or downtime.
- No shortcuts: Every project gets the same attention to detail with long-lasting results.
Our process doesn't hide imperfections. It resolves them, extending the life of your surfaces while restoring their natural luster.
Environmentally Responsible Cleaning
We’re as committed to your family’s safety as we are to the quality of your bathroom. That’s why our entire process is free from the caustic substances used in most refinishing jobs. We never use methylene chloride or other toxic stripping agents.
Our cleaning solutions are biodegradable, non-corrosive, and safe for both residential and rental properties. Whether you're upgrading your family bathroom or preparing a unit for a new tenant, we offer peace of mind with every job.
Areas We Proudly Serve
We’re based in Dagsboro, DE, and proudly serve homes and properties throughout Sussex County, including:
- Ocean View
- Frankford
- Bethany Beach
- Millsboro
- Selbyville
- Millville
- Ocean City
- And nearby communities
Bring Back the Shine—Without the Risks
You don’t need to replace your tub. You don’t need to refinish it. You just need the right process. At CMC Bathtub Refinishing, we’re redefining what it means to restore a surface—one deep clean at a time.
Whether you’re dealing with bathtub stains, kitchen stains, or just want to restore your bathroom to its former glory, we’re here to help. You’ll love how your space looks—and you’ll breathe easier knowing there’s nothing toxic or temporary involved.
FAQ
What’s the difference between bathtub restoration and bathtub refinishing?
Bathtub restoration is a deep, professional cleaning and rejuvenation process that brings back the original surface of your tub without adding paint, epoxy, coatings, or glazes.
Bathtub refinishing, on the other hand, involves spraying the tub with a thick coating of enamel or epoxy paint to make it look new.
Restoration is:
- Non-toxic
- Fume-free
- Peel-free
- Long-lasting
- Safe for porcelain, fiberglass, acrylic, and cast iron
Refinishing is:
- A painted-on coating
- Prone to peeling and chipping
- More expensive long-term
Homeowners who want a natural, coating-free solution almost always choose restoration.
Do you use paint, spray-on epoxy, or coatings on the bathtub?
No. This service does not involve paint, sprays, glazes, epoxy, bonding agents, or resurfacing coatings of any kind.
We restore:
- Porcelain tubs
- Fiberglass tubs
- Acrylic tubs
- Cast-iron tubs
The original finish is preserved by removing years of:
- Rust
- Soap scum
- Hard water buildup
- Mineral deposits
- Surface staining
- Cosmetic dullness
This method looks cleaner, lasts longer, and never peels, because there’s no coating to fail.
How long does bathtub restoration last?
A properly restored bathtub can maintain its shine for many years with simple upkeep. Because the service restores the original surface, the results last significantly longer than traditional bathtub refinishing.
And unlike refinishing, it never peels, bubbles, chips, or cracks.
Does restoration work for old or heavily stained bathtubs?
Yes. Restoration is designed for tubs that have:
- Rust stains
- Iron deposits
- Hard water buildup
- Yellow discoloration
- Soap scum buildup
- Scratches or surface erosion
- Years of neglected cleaning
In most cases, even older 1950s–1980s porcelain and cast-iron tubs can be restored to a brilliantly smooth, glossy finish.
Can you restore fiberglass or acrylic tubs and showers?
Absolutely. Fiberglass and acrylic are very common in modern homes, and they suffer from:
- White chalky oxidation
- Yellowing
- Hard water stains
- Soap scum buildup
- Scratches
- Dull, faded surfaces
Our restoration process removes the buildup without sanding, painting, or coating, and leaves the fiberglass or acrylic clean, smooth, and renewed.
Can you remove rust or iron stains from my bathtub or shower?
Yes. Rust removal is one of the most common restoration services.
We use professional-grade, non-corrosive cleaners to eliminate:
- Orange rust streaks
- Iron staining
- Metal discoloration
- Rust rings left by shaving cream, cans, or metal fixtures
This restores the tub’s original white or off-white tone without harming the surface.
Will restoring the bathtub remove scratches or dull areas?
Most scratches, dull spots, and scuff marks are surface-level and can be completely restored.
The process polishes away:
- Surface etching
- Discoloration
- Dullness
- Small scratches
- Abrasion
Deep gouges or chips can often be improved significantly, though some structural damage may require a specialist.
Is restoration safe for kids, pets, or people with chemical sensitivities?
Yes — one of the biggest advantages of this method is zero toxic fumes and zero harsh chemicals.
Unlike refinishing, which uses:
- Paint
- Epoxy
- Solvents
- Spray booth systems
Restoration uses biodegradable, eco-friendly cleaning compounds that are:
- Non-toxic
- Odor-free
- Safe for children and pets
- Safe for indoor air quality
Your bathroom remains safe during and after service.
How long does a typical bathtub restoration take?
Most bathtub restorations take 1.5 to 3 hours, depending on stain severity.
Shower and sink restoration typically take less time.
Unlike refinishing, there is:
- No curing time
- No 24–72 hour drying period
- No hazardous overspray
- No shutting down your bathroom for days
You can use your tub or shower the same day.
Do you restore bathroom sinks as well?
Yes. We restore both bathroom and kitchen sinks, including:
- Porcelain sinks
- Cast-iron farmhouse sinks
- Acrylic sinks
- Integrated vanity sinks
- Utility sinks
Common sink issues we fix:
- Mineral stains
- Rust rings
- Hard water buildup
- EtchingSoap scum
- Surface discoloration
Restoration is ideal for sinks that are structurally sound but cosmetically worn.
What types of showers can be restored?
We restore:
- Fiberglass showers
- Acrylic shower enclosures
- Walk-in showers
- Tub/shower combos
- Shower bases & pans
- Surround wall panels
We remove deep stains, grime, and mineral buildup to restore a clean, bright surface.
Does bathtub restoration make the tub slippery?
No. Restoration improves the surface traction by removing:
- Soap residue
- Body oils
- Mineral buildup
The final result is smooth but not slick, with a natural porcelain or fiberglass feel.
How do I maintain my restored bathtub or shower?
Maintenance is simple. Avoid harsh abrasives and use mild, non-acidic cleaners.
Recommended:
- Dish soap
- Soft sponges
- Gentle bathroom cleaners
Avoid:
- Abrasive powders
- Steel wool
- Acidic cleaners
- Cheap sprays that leave residue
A restored tub stays clean longer because buildup has been completely removed.
Can you restore jetted tubs or older cast-iron tubs?
Yes. Restoration works extremely well on:
- Cast-iron bathtubs
- Antique porcelain tubs
- Jetted tubs
- Whirlpool tubs
- Clawfoot tubs
These surfaces are often better candidates for restoration than refinishing.
Do you offer stain removal services for showers, tubs, and sinks?
Yes — we specialize in removing:
- Rust
- Hard water stains
- Calcium buildup
- Iron deposits
- Yellow discoloration
- Soap scum
- Mineral stains
We restore the actual surface instead of covering it with coatings.
How do I schedule service?
Simply contact us and we’ll provide:
- A free quote
- A recommended service
- A convenient appointment time
We serve all surrounding local areas and complete most jobs in one visit.
Ready to Get Started?
It’s time to stop settling for temporary fixes or costly replacements. If your bathtub, shower, or sink is stained, dull, or discolored, let’s talk about restoring it the right way.
Contact CMC Bathtub Refinishing today to schedule your consultation or request a quote. We’ll walk you through the process, answer your questions, and get your surfaces looking their best again—safely, and affordably.
Call now or send us a message—we're ready to bring your surfaces back to life.
What Our Clients Say
★★★★★
Jeff was punctual, very communicative, no hidden costs and saved us over 20k by fixing our bath tub as opposed to us having to replace them because of unsightly stains.
10/10 great guy to work with and very skilled at what he does.
-Steve B.
★★★★★
Professional! 10/10 Jeff restored our bathtub and floor tile, which was a huge stress before last-minute rental.
He removed yellow rust, layers of soap accumulated over years, water stains, glue from shower rails, replaced dented overflow plate, polished nobs. Really well done, fresh, sparkling clean bathtub now. He really cleaned floor tile and grout, so we do not need to replace it. Im very happy with result. Money well spent. Thank you Jeff
-Natasha
★★★★★
CMC Bathtub Refinishing and Repairs / Jeff did a great job re-aligning the shower doors and scrubbing clean the door tracks and all the metal framing on the doors, esp the bottoms sitting in the track. Very professional & easy to work with. Get him if you need to clean / refinish tubs / showers / sinks. Don't have anything replaced at high cos.. Have Jeff evaluate & repair / clean.. spend a lot less & be very satisfied.. !!
-Dennis H.
Contact Form
Phone:
(302) 537-4841
Areas We Serve: Bethany Beach and Lewes, DE and Ocean City, and Salisbury, MD